Technical Parameters of Pulse Ultraviolet Sterilizer

(Disinfection robot) PulseIn-D

1 Pulse xenon lamp

1.1 Built-in xenon lamp tube produces pulsed intense light

1.2 Light-emitting arc length ≥ 37.5 cm

1.3 Electrode spacing ≥ 3.5 cm

1.4 Luminous frequency ≥ 2 Hz; voltage across the electrode ≥ 3000V

1.5 The lamp pulse luminous life ≥ 3 million times

2 High voltage discharge capacitor

2.1 Charge and discharge times ≥ 50 million times

2.2 The system automatically detects the status of the discharge capacitor and automatically reminds you to replace the expired discharge capacitor

3 System power

3.1 Input voltage: 220V/50HZ

3.2 Input power ≥1200W

4 Disinfection factor

▲4.1 The disinfection factor is a full-band pulse cold light including ultraviolet light in the 200nm-315nm band

▲4.2 The energy of pulsed ultraviolet light with wavelength of 250nm-280nm should be >62000uw/cm2 at 1 meter (test report provided)

5 Disinfection effect (provide test report)

5.1 The killing rate of MRSA on the surface of the object at 3 meters after 5 minutes of irradiation is ≥ 99.9%

5.2 The killing rate of natural bacteria on the surface of 3 meters after 5 minutes of irradiation ≥ 99.0%

5.3 The killing rate of Acinetobacter baumannii ≥ 99.9% at 3 meters after irradiation for 5 minutes

6 Disinfection time

6.1 The disinfection time can be set to 5 minutes, and the disinfection radius is ≥ 3 meters, which is set according to the object to be disinfected and the size of the room.

7. Smart lamp lifting part

▲7.1 The lamp will automatically rise and fall according to the instructions of the system and the working status, and the working height is ≥165cm.

7.2 Lamp life self-test, the system automatically reminds to replace the expired lamp

7.3 The outside of the lamp tube adopts imported high-permeability quartz glass, high-permeability disinfection and sterilization light, cut off 200NM

The following light is transmitted to avoid ozone generation far away from the lamp tube.

▲7.4 An ozone filter and decomposition net is installed on the top of the lamp tube to decompose and filter the ozone generated in the area near the lamp tube; the ozone concentration after disinfection and sterilization is <0.08mg/m³ (test report provided)

8. The imported mirror surface is formed into a spherical reflecting surface by the mold to increase the energy of the light radiated outward and increase

Plus disinfection effect

9. The system is ready to use: using pulse flicker to emit strong cold light, no damage to the irradiated equipment, metal plastic, wall curtains and other environments

10. 7 inch smart capacitive touch screen

10.1 The software of the touch screen has the function of reminding the completion of disinfection, raising the lamp, lowering the lamp, start flashing, stop flashing, system setting, parameter setting, etc. function keys

10.2 The software of the touch screen has an intelligent management function, automatically recording the relevant data of each disinfection,

The system automatically collects the data of each module of the system and has an automatic alarm function.

10.3 The 7-inch flat-panel remote control has the same functions as the host’s touch screen;

11. The noise of the whole machine ≤ 65DB

12. The net weight of the machine is 65KG, and the packaging is 100KG.

13. The manufacturer has passed ISO9001 certification

▲14. The product model has passed CE certification; the product has a patent certificate; the product has passed the new search report.

▲15. Domestic >10 hospitals above Class III have installed capacity.

16. Machine size: 55cm wide, 72cm long, 115cm high;

17. Warranty period for the host and xenon lamp tube: 12 months.

Product Description

The PulseIn-D series of pulsed xenon UV sterilizer (germicidal robots) produced full-spectrum strong pulsed light (including full-band ultraviolet light, especially 200nm-320nm) through environmentally friendly xenon lamps, and mainly pass wide-spectrum, high-energy pulsed ultraviolet light Irradiation destroys microbial DNA or RNA to destroy microbes or microbial regeneration, to achieve rapid and efficient disinfection of viruses, fungi, bacteria, spores and other pathogens. The product provides a safe, fast and efficient sterilization and disinfection treatment method, which can greatly reduce the microbial load in the environment of medical and health institutions and reduce hospital infection rates (HAIs) of medical and health institutions.

Main uses

The pulsed xenon UV sterilizer (germicidal robots) produced by our company can greatly reduce the microbial load in the environment of medical and health institutions by quickly killing pathogens such as viruses, fungi, bacteria, and spores. It can be widely applied to medical institutions at all levels. It can effectively reduce the hospital infection rate (HAIs) of medical institutions at all levels by rapid sterilization and disinfection of the surface of objects and air.

Sterilization effects of products

The certified bactericidal effect is shown in the following table:

Sterilization effects

Pulsed xenon lamp 1. Built-in xenon lamp tube produces pulsed intense light 2. Light-emitting arc length ≥ 37.5 cm 3. Electrode spacing ≥ 3.5 cm 4. Luminous frequency ≥ 2 Hz; voltage across the electrode ≥ 3000V 5. The lamp pulse luminous life ≥ 3 million times

High voltage discharge capacitor 1 .Charge and discharge times ≥ 50 million times 2. The system automatically detects the state of the discharge capacitor and automatically reminds you to replace the expired discharge capacitor.

System power 1.Input voltage: 220V/50HZ 2.Input power ≥1200W

Disinfection factor 1 .The disinfection factor is full-wavelength pulse cold light, including ultraviolet light in the 200nm-315nm band 2. The energy of pulsed ultraviolet rays with wavelengths of 250nm-280nm should be >62000uw/cm2 at 1 meter (test report provided) Disinfection effect (provide test report) The killing rate of natural bacteria on the surface of 3 meters after 5 minutes of irradiation ≥ 99.0%

7 inch smart capacitive touch screen

The manufacturer has passed ISO9001 certification

The product model has passed the CE certification; the product has a patent certificate; the product has passed the new search report.

Features and advantages

1. Quick disinfection: A quick disinfection method in a certain space can kill Ebola, C.diff, MRSA, CRE and other viruses and resistant bacteria

2. High working efficiency: 5 minutes can complete the disinfection task of 25 m²; 30 minutes can solve the 150 m²;

3. Simple operation: no need for professional operation, nurses, nurses and cleaning staff can operate after training to complete the killing;

4. No side effects: no pollution, no chemical residues;

5. No damage: The cold light technology is used to not damage the performance and surface of the medical equipment; the man-machine is separated during use, and the wireless remote control is used to avoid damage to the human body;

6. Convenience: ready to use, disinfect at any time.

System block diagram

Product packaging

When the equipment moves in the plane, try to push the equipment and do not pull the equipment, as shown in the figure below:

error movement Figure

right movement

The equipment moves in a plane. When there is a large groove or protrusion, it should be moved forward with the foot pedal, so that the equipment passes through the groove, and the handle cannot be pulled hard. As shown below:

error movement of groove

right movement of groove

When the equipment passes through the slope, it must be noted that when moving the device, you must stand in front of the device and pull the device uphill, and the tilt angle of the device cannot exceed 30 degrees. As shown below:

Attention: Remember! Do not push the instrument behind it when you go up the slope!

error movement Figure

right movement

When the equipment passes through the upper and lower steps, multiple people are required to lift the device, and it is forbidden to forcibly drag the device upward on the step, as shown below:

error movement

right movement

Flashing readiness

Interface of the irradiation process

Product Details